UNMANNED TECH
  • Home
  • Shop
  • Students/Researchers
  • About

7 Inch FPV Monitor with 5.8Ghz Diversity Reciever Manual

4/2/2013

Comments

 
Picture
If you are looking for a easy to use FPV Monitor and Receiver on the ground then this is the ideal setup.  The monitor and receivers are built into one unit that allows you to quickly setup your FPV gear on the ground with no messy or complicated wires.  Making for easy transportation/storage.  Simply plug the power/battery into the monitor! 

The built in 5.8Ghz DIversity will ensure you always get the best possible signal, and allows you to use differant antennas if you require.  This monitor is also ultra bright and comes with a sunshade visor.

Picture
FPV Monitor Front - Click for larger image
  • Screw the antennas and then power the LCD screen. Power LED is on and RX1 and RX2 are flashing alternately. RF1 is to RX1 and RF2 is to RX2, better signal first.(See Figure1). RF1 and RF2 must be in the same Channel.
  • Plug AV cable to any of the two AV IN ports, LCD will switch to the AV in Automatically
  • Button ① POWER: LCD power on/off button.
  • Button ② SOURCE: Selection for AV1 and AV2 
  • Button ③ MENU/DOWN: Setup-Brightness, Contrast,  Color, Language, Image Rotation, Options-zoom 16:9/4:3, Auto turn off (5s/10s/OFF), Rest
  • Button ④ MINUS: Down
  • Button ⑤ PLUS: Up
Picture
FPV Monitor Back - Click for larger image

  • Plug AV cable to RF1 AVOUT and connect the other end to the Monitor, then you can see the signals from RF1. So does the RF2 AVOUT. RF1 and RF2 must be in different channels to avoid signal interference.

How to Change the language

Picture
Picture
  • If you receive a version of this FPV monitor in the wrong language, then you need to click the menu button to move the the 4th option to change the language. 

Specification

  • Screen size:7” 
  • Screen type: TFT LCD Screen/long life, LED backlight 
  • Resolution: 800*480 
  • Brightness: 450cd/m2 
  • Contrast: 500:1 
  • View Angle: 140/120degree (Horizontal/Vertical) 
  • Working Voltage: DV 7-12V(center positive) or 11.1V Li-battery 
  • Power Consumption: < 8w 
  • Size: 180mm x 120mm x 23mm 
  • Built-in 5.8Ghz Dual diversity receiver automatically for best reception 
  • RPSMA Antenna Connections
  • Built-in 2CH 5.8Ghz AV output and 1CH AV input 
  • Support 9 languages menu selection 
  • Working temperature: -10℃~+ 65 

Features

  • Built-in Dual Receiver Automatically for best reception Automatic Antenna Switching 
  • Dual buffered AV outputs 
  • Can receive 2 different channels at the same time 
  • Not affect by 2.4GHz R/C Radios 
  • AV Receiver with Diversity inputs 
  • Small, light weight, durable 

frequencies 

  • CH1: 5705MHz 
  • CH2: 5685MHz 
  • CH3: 5665MHz 
  • CH4: 5645MHz 
  • CH5: 5885MHz 
  • CH6: 5905MHz 
  • CH7: 5925MHz 
  • CH8: 5945MHz 
Comments
comments powered by Disqus

    Categories

    All
    Camera
    ESC
    Flight Controller
    Fpv Gear
    Gimbals
    Gluonpilot
    Multirotor
    Radio Control
    Telemetry

    RSS Feed

    Forums
    Buy Stuff
    Knowledge Base
Picture
Visit our Community Forums if you have any questions
  • Home
  • Shop
  • Students/Researchers
  • About