UNMANNED TECH
  • Home
  • Shop
  • Students/Researchers
  • About

Q650/ Q800 Stackup Plates for mounting stuff

27/1/2013

Comments

 
Picture
Stackup for AIOP board
Picture
Stackup for APM2.5+ board
Buy Now
If you are looking for a nice way to mount all of your gear onto your Q650/Q800 Frame, you should have a look at our new stack up plates.  On the product listing you can choose what components you need so that you can create your own stackup.
Picture
If you are using AIOP or Multiwii boards with the same 5cm x 5cm footprint then you can also mount the included PDB on the stackup as shown.

You can also use some Vibration Dampers on the stackup for the flight controller.
Picture
If you are using an ArduPilot Mega 2.5+ board, then you can mount it as shown, you will also need to use some double sided tape to secure the board down.  This is a good idea because it also reduces the vibrations on the board so it will perform better.
Comments
comments powered by Disqus
    Community
    Drone Guides

    RSS Feed


    Categories

    All
    Giveaway
    New Product
    News & Updates
    Tips & Tricks


    Manuals
    Shop

Picture
Visit our Community Forums if you have any questions
Photo used under Creative Commons from Ronnie Garcia
  • Home
  • Shop
  • Students/Researchers
  • About