Foldable GPS Mount Assembly Guide

This guide will show you how to assemble your foldable GPS mount.

This is a foldable GPS module mount that is 16cm tall. It can be easily folded down to protect your GPS module during storage and transport. It is made from aluminium and has a 4mm carbon fiber rod. The total weight of this mount is 20g.

Buy GPS Mount

• You should receive the parts as shown in the image with your foldable GPS mount.
  
• The screws are located in a small plastic bag

• The first step is to take the bottom mount and bottom tube mount as shown in the image

• Attach the screw through the bottom GPS mount as shown in the picture
• Make sure the screw is tightened enough so that it is properly set in the countersunk hole.

• Now you will need to take one of the grub screws and the carbon tube.
• Slide the tube into the tube mount hinge and secure it with the grub screw.

• Now you will need to slide the threaded holder down the tube as shown.

• Now you will need to attach the top GPS mount to the tube.
• As with the bottom tube mount, you simply slide the tube into the GPS mount and secure with the grub screw.

• Once complete your GPS mount shown look like this.
• To fold the GPS holder you simply loossen the threded holder and move it upwards.
• To extend the GPS mount simply slide the threded holder to the bottom and secure it.
• The final step is to secure this to your frame.
• The mounting holes are anywhere between 16-35mm in diameter.