Our first batch of arducopter Iris quadcopters have just arrived! So all those in UK/Europe don't have to pay loads for shipping/customs to get their hands on one!
Please note that this batch is still the developer edition and is mainly aimed at those who have some multirotor experience. Great if you also want to provide some valuable input to the consumer version, But obviously if you have any questions please let us know and we will be happy to help!
Have a look at the info page for full details of the arducopter Iris
If you are looking for a really neat setup for your quadcopter, then you should have a look at our new 4in1 quadcopters ESC's. These combine 4 ESC with power distribution all into one small package. We are now selling 20A and 30A versions.
We now have another version of our mini FPV combo. This one now includes a RPSMA connector so you can easily connect a propper antenna to this kit. Although the antenna adds extra weight and size to this mini kit, it will give you much better range and signal. However if you are after something that is super small, we are still selling a mini FPV combo with built in wire antenna
If you are never sure if your FPV transmitter is compatible with your receiver/monitor then you no longer need to shop around to find the correct frequencies. Our new range of FPV transmitters have been updated to allow them to operate on 32 channels (21 channels for the 25mW version). This makes them compatible with almost all 5,8Ghz FPV gear on the market including the fatshark headsets that we sell.
Other than the new multiband feature, the specs are the same as before, including the price!
We will also soon start selling 32 Channel receivers to update our current line.
Frequency Table for 200mW FPV Transmitter
Frequency Table for 25Mw FPV Transmitter
If you think our recently released voltage regulator was too big, you should have a look at our new mini voltage regulator that weights just 2g, and is the same size as a SD card. Read more for specifications. Very tiny for an adjustable regulator that can handle up to 28V!
Our 3506Q Motor has been out of stock for quite some time now, and that is because we where working with the factory on an improved prop holder. Before these motors used the collet type which was not suitable for heavy loads and vibrations. The new adaptor bolts onto the motor for a much more sturdy and precise way to mount your props. Also the price of these motors are a couple pounds cheaper than the older ones!
We have recently released a new quadcopter frame that is specially designed for FPV use and comes with a built in GoPro Gimbal! This is a great quadcopter frame is you are looking for a quadcopter that is compact while still having a 2 axis gimbal.
We have recently added a new range of propellers (10 and 11 inch) size that are very similar to the graupner e-prop, tests show that they have the same performance, but for a fraction of the price! Read more for full details.
This is a battery mount for your FPV monitor, with a capacity of 4600mAh, this battery will last for over 6 hours with most monitors. Other features like built in charger and battery level indication make this a great addition to your FPV setup.
If you are looking for an effective way to provide a clean, and constant power supply to your FPV or other project, you should have a look at our new voltage regulator,. Ideal if you are using a 4S or larger battery and need to step the voltage down for your FPV gear, or other electronics. It can handle 4.5-35V Input and 1.25-30V Output, so there are plenty of application for this.
We are now selling some new arduino compatible controller boards and some new 5.8Ghz FPV antennas.. read more for the details!
We are now selling a great and affordable autopilot controller that can control your multirotor or fixed wing plane, the FY-DOS autopilot is a very small and feature packed flight controller which makes this a great system for those who are building their first multi rotor/FPV plane. Flight modes include return to home, stabilise/ position hold, and also loiter modes for full details go here.
Just a quick update to say that we have recently added a couple of new grove elements to our long list of arduino grove components, these include flame sensors, new IMU modules, and also a couple of relays.
Just a quick update to let you all know that we are now selling some cool enclosures for your 433mhz Radio Modules. Based of the design from barneyj on thingiverse, but scaled slightly to fit the radio module more effectively. We will also introduce additional colours in the future depending on how well these sell, if you want a specific colour let us know by commenting below!
A couple weeks ago we announced our stackup plates v1 for mounting your gear onto your multicopter. These where simple square carbon fiber plates that you caould stack onto one another. We have since received a bunch of customer feedback so we are happy to announce our stackup plates v2 that should be ready soon. Read more for details!