UNMANNED TECH
  • Home
  • Shop
  • Students/Researchers
  • About
  • Contact
  • Manuals
  • Regulations
  • Multicopter Safety Notes
  • Blog

This blog is no longer updated

Please visit https://www.dronetrest.com/

5.8Ghz FPV Monitor

8/2/2013

Comments

 
Picture
Buy Now
Last week we introduced our FPV Diversity Monitor that features two receivers for the best possible signal.  However if that is something you dont need, or you are looking for something abit cheaper then you should have a look at our new 5.8Ghz FPV monitor.

This monitor has a built in 5.8GHz receiver so it is still super easy to use and setup at the flying field (no messy wires), just plug in the battery on the ground and you can get a live stream from your aircraft.
Picture
Picture
This is a 7 inch (800 x 480 resolution) FPV Monitor with a built in 5.8Ghz Receiver.  This monitor is ideal for those who want FPV system that is quick to setup and easy to transport.  Because the 5.8Ghz Diversity receiver is built in you don't need to worry about lots of wires or batteries to power each individual part, you just need to plug the monitor into your battery/ other power source and you are good to go.  This monitor also has a single video output so you can still use video goggles if you want.  A deans connecter comes pre installed so it is easy to power it up with your battery.

This monitor is compatible with the 5.8Ghz transmitters we sell.  But if you are unsure, please make sure that the channel frequencies that the transmitters put out will match a channel on this receiver.

Specifications


  • Screen size:7” 
  • Screen type: TFT LCD Screen/long life, LED backlight 
  • Resolution: 800*480 
  • Brightness: 450cd/m2 
  • Contrast: 500:1 
  • View Angle: 140/120degree (Horizontal/Vertical) 
  • Working Voltage: DV 7-13V(center positive) or 11.1V Li-battery 
  • Power Consumption: < 6w 
  • Size: 170mm x 110mm x 40mm 
  • Built-in 5.8Ghz receiver 
  • RPSMA Antenna Connections
  • Built-in 1CH 5.8Ghz AV output and 1CH AV input 
  • Support 9 languages menu selection 
  • Working temperature: -10℃~+ 65 ℃

Picture
Picture
Picture
Picture

Supported Frequency Channels

• CH1: 5705MHz
• CH2: 5685MHz
• CH3: 5665MHz
• CH4: 5645MHz
• CH5: 5885MHz
• CH6: 5905MHz
• CH7: 5925MHz
• CH8: 5945MHz

Picture
Comments
comments powered by Disqus
    Community
    Drone Guides

    RSS Feed


    Categories

    All
    Giveaway
    New Product
    News & Updates
    Tips & Tricks


    Manuals
    Shop

Picture
Visit our Community Forums if you have any questions
Photo used under Creative Commons from Ronnie Garcia
  • Home
  • Shop
  • Students/Researchers
  • About
  • Contact
  • Manuals
  • Regulations
  • Multicopter Safety Notes
  • Blog